House Christmas Lights Calculator

How many feet of lights your house needs, how many strands fit on one outlet and what they cost to run.

100% in your browser — nothing uploaded

Feet of lights, bulbs, strands and what they cost to run

Mini lights
C7
C9

It starts at EIA’s 2026 forecast for the U.S. average: 18.2 cents. Your bill has your real price.

—of lights
—bulbs
—strands
—clips
—strands
—watts in all
—kWh for the season
—for the season

Paid link C9 Christmas lights, 125 ft, on Amazon →
We earn a commission if you buy, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

How the house lights calculator works

Type the length of your gutters and roof peaks, and the page adds 10% for corners and connections, then gives the feet of lights, bulbs, strands and clips to buy. A 100-foot roofline comes to 110 feet: 110 C9 bulbs 12 inches apart, on 5 strands of 25.

It then runs the numbers both ways, LED and incandescent: what the display draws, how many strands fit end to end and what a season costs at your price per kWh. A strand of 25 incandescent C9 bulbs uses about 42 kWh over 40 nights of 6 hours, and the same strand in LED about 3.6. If you already own your lights, switch modes and type what you have.

How to measure your roofline for Christmas lights

  1. Pick what you’ll light: gutters, sloped edges, windows, doors, railings. Skip what you won’t.
  2. Measure the gutters from the ground: a gutter runs about as long as the wall under it. A measuring wheel or a tape along the wall works.
  3. For each peak, take the width at the base and the height, and type them in. A peak 24 feet wide and 8 feet tall has about 28.8 feet of edge.
  4. Add the windows and doors you’ll outline. A 3 × 5 ft window is 16 feet around.
  5. Add 10% for corners, drops and the connections between strands, or 15% for a house with many corners.

How many Christmas lights for your roofline

Roofline measuredLights to buy (+10%)C9 bulbs (12 in apart)Strands of 25LED (about 0.6 W a bulb)Incandescent (7 W a bulb)
50 ft55 ft55345 W525 W
75 ft83 ft83460 W700 W
100 ft110 ft110575 W875 W
150 ft165 ft1657105 W1,225 W
200 ft220 ft2209135 W1,575 W
250 ft275 ft27511165 W1,925 W

The watts count every strand you plug in, including a last one that is only partly used. Bulb spacing changes the count:

SpacingBulbs for 100 ft
6 in (15 cm)200
8 in (20 cm)150
12 in (30 cm)100
15 in (38 cm)80

How much Christmas lights cost to run

The formula: watts ÷ 1,000 × hours a night × nights × your price per kWh. This table uses 6 hours, 40 nights and 18.2 cents per kWh, EIA’s forecast for the U.S. average in 2026. Your bill has your real price.

StrandWattskWh a seasonCost a season
100 mini lights, LED4.8 W1.2$0.21
100 mini lights, incandescent40.8 W9.8$1.78
25 C7 bulbs, LED12.5 W3$0.55
25 C7 bulbs, incandescent125 W30$5.46
25 C9 bulbs, LED15 W3.6$0.66
25 C9 bulbs, incandescent175 W42$7.64

C7 vs C9 bulbs

C7C9
Diameter⅞ in1⅛ in
Length, about1½ in2¼ in
BaseE12 (candelabra)E17 (intermediate)
Incandescent5 to 7 W7 to 10 W
LEDUnder 1 WUnder 1 W

The sizes are the names: C7 is ⅞ of an inch across and C9 is 9/8, just over an inch. Both come with 12-inch socket spacing on most strands. The bases aren’t interchangeable, so check the socket before buying spare bulbs.

Where these numbers come from

Bulb sizes, bases and the watts ranges are from 1000Bulbs and Christmas Light Emporium. The page uses 5 W and 7 W for incandescent C7 and C9, the low end of those ranges, and about 0.5 and 0.6 W for LED. The 25-bulb set labelled 175 W with a 210 W maximum is a Christmas Central listing. Mini strands use about 41 W and 5 W; ElectricRates.org says “roughly 40” and “roughly 5.” The 10% is Govee’s and the 10–15% Christmas Light Emporium’s. The price is from EIA’s Short-Term Energy Outlook of October 6, 2026, and its latest monthly figure, for August 2026, was 18.16 cents. Six hours for 40 nights is ElectricRates.org’s example. The tag on your lights beats all of these.

FAQ

How many feet of Christmas lights do I need for my house?

Add up every gutter run, sloped edge, window and railing you want to light, then add about 10% for corners and connections. A 100-foot roofline takes about 110 feet of lights. A strand of 25 bulbs 12 inches apart covers about 25 feet.

How many C9 lights can I put on one outlet?

The tag on the strand has the limit. A common 25-bulb incandescent C9 set is labelled 175 W with a 210 W connected maximum, so only one fits per run. A 25-bulb LED set draws about 15 W, so 14 fit under the same 210 W. Either way, keep a circuit under about 1,440 W for a load left on for hours.

How much does it cost to run Christmas lights?

Watts ÷ 1,000 × hours × nights × your price per kWh. Over 40 nights of 6 hours at 18.2 cents, a 100-light LED mini strand costs about $0.21 and an incandescent one about $1.78. A 25-bulb C9 strand costs about $0.66 in LED and $7.64 in incandescent.

C7 or C9 for a roofline?

For rooflines, the sources we read point to the C9: 1000Bulbs says they are “most commonly used for lining roofs.” The C9 is the bigger bulb, 1⅛ inches across against ⅞ of an inch, and the bases differ, so a C7 bulb won’t fit a C9 socket.

How do I measure a roof peak from the ground?

Measure its width at the base and estimate its height, and the calculator works out both sloped edges. A peak 24 feet wide and 8 feet tall has about 28.8 feet of edge.

How many feet is a strand of 100 lights?

It depends on the spacing. At 12 inches apart, 100 bulbs run about 100 feet; at 6 inches, about 50 feet. The box states the lit length.

Related tools